Color Cosmetics, Skin Care

SCT4151 360 Shield BB Cream

Released By Sensient Cosmetic Technologies

SCT4151 360 Shield BB Cream
Ingredients
%

Phase A-1

  • DI water (Sensient)
  • q.s.
  • Laponite KLG-XR (Eckart America) (Lithium magnesium sodium silicate)
  • 0.50

Phase A-2

  • Zemea Propanediol (Dupont, Tate & Lyle) (Propanediol )
  • 3.00
  • Unipure Yellow LC 188 PHY (Sensient) (CI 77492 (and) phytic acid (and) sodium hydroxide)
  • 0.55
  • Unipure Red LC 388 PHY (Sensient) (CI 77491(and) phytic acid (and) sodium hydroxide)
  • 0.15
  • Unipure Black LC 998 PHY (Sensient) (CI 77499 (and) phytic acid (and) sodium hydroxide)
  • 0.05

Phase A-3

  • Covacryl RH (Sensient) (Sodium polyacrylate)
  • 0.40
  • Glycerin
  • 2.00
  • Euxyl PE-9010 (schülke) (Phenoxyethanol (and) ethylhexylglycerin)
  • 0.70
  • 5% Natpure CellGum Plus in Water (Sensient)(Microcrystalline cellulose (and) cellulose gum (and) cellulose)
  • 5.00

Phase B

  • Covascreen UVR CCT (Sensient) (Caprylic/capric tri-glyceride (and) titanium dioxide (and) triethoxycaprylylsilane)
  • 15.00
  • Montanov 68 (Seppic) (Cetearyl alcohol (and) cetearyl glucoside)
  • 3.00
  • Jeechem GMS 165 (Jeen) (Glyceryl stearate (and) PEG-100 stearate)
  • 1.50
  • Dermofeel Sensolv (Evonik Dr. Straetmans) (Isoamyl laurate)
  • 1.00
  • Covabead Crystal (Sensient) (Calcium sodium borosilicate)
  • 3.00
  • Cetyl stearyl alcohol (Seppic) (Cetearyl alcohol)
  • 1.50
  • Florasun 90 (Floratech) (Helianthus annuus (sunflower) seed oil)
  • 4.50

Phase C

  • Natpure Film GR (Sensient) (Glyceryl rosinate(and) aqua (and) cellulose (and) sodium sulfate)
  • 5.00
  • Diamond (Sensient) (Fragrance)
  • 0.10

Phase D

  • 20% Citric acid in water (Citric acid)
  • pH=7.0

Procedure

Premix phase A1 until clear. Premix phase A2 and A3. Add phase A2 into A1 under moderate shear at 500rpm for 10 minutes. 2.Add phase A3 into phase A under moderate shear. Mix phase A until homogenous for 5 minutes. Heat phase A to 75°C. 3.Prepare phase B and heat to 75°C. Mix under moderate shear. 4.Add phase B to phase A at 75°C with high shear at 1,500 rpm for 1 minute. Homogenize the batch at 5,000rpm for 3 minutes at 75°C. 5.Mix the batch with propeller blade, decrease the mixing speed to 500 rpm. Cool down the batch to 40°C. Add phase C into the batch. Continue to mix for 5 minutes. 6.At 25°C, adjust the pH to 7.0 by adding 20% citric acid in water into the batch.

More Information

Sensient Tel: 908-757-4500 Email: [email protected] Website: www.sensient-cosmetics.com

Request more information from Sensient Cosmetic Technologies